Simplicity RTH Series Operator's Manual page 32

Hide thumbs Also See for RTH Series:
Table of Contents

Advertisement

Troubleshooting
8.
Brake will not hold.
A.
Brake is incorrectly adjusted. See Adjustment section.
B.
Brake pads worn & require replacement. See your dealer.
9.
Tractor handles poorly.
A.
Steering linkage is loose. Check and tighten any loose connections.
B.
Improper tire inflation. Check and correct.
C.
Wheels are spinning and slipping. Use weights to provide additional stability and traction.
D.
Moving too fast on slopes. Reduce speed.
10.
Tractor drive belt does not stop when clutch-brake pedal is depressed.
A.
Belt stops out of adjustment. See Adjustments section.
B.
Linkage not operating properly.
TROUBLESHOOTING (Mower)
1.
Mower will not raise.
Lift chain not attached or broken. Attach or repair.
2.
Uneven cut.
A.
Mower not leveled properly. See leveling adjustment in Mower Adjustment section.
B.
Tractor tires not inflated equally or properly.
3.
Mower cut is rough looking.
A.
Engine speed too slow. Set for three-fourths to full speed.
B.
Tractor ground speed too fast. Use lower gear.
C.
Blades dull & require sharpening. See Normal Care section.
D.
Mower drive belt slipping. Belt oily or worn. Clean or replace belt as necessary. Readjust belt tension.
30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RTH Series and is the answer not in the manual?

Table of Contents