Erasinga Photoright After Recording It; Basic Playback; Viewingphotos - Canon DC410 Instruction Manual

Erasinga PhotoRight After Recording it
You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option (or immediately
after recording it, if [REVIEW] is set to
[ _ OFF]).
V
While reviewing the still image
immediately after recording:
1 Push the joystick (Y) toward /_.
2 Select (_lll_) [ERASE] and press
Basic Playback
/ iii _ii! _!_!_I!!! !_!!!!!!!!!!!!!_
ViewingPhotos
1 Move the ,R,/=_ switch to _ (still
images).
2 Turn the _ switch to ON, then
turn it toward MODE and release it
to set the camcorder in PLAY
mode.
The green PLAY indicator will turn on.
3 Push the joystick (41_) to move
between still images.
Push the joystick (4_-) and hold it
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large number
of still images, you can jump 10 or 100
images at a time.
Photos• 53