Channel Set - Samsung DVD-R120 Instruction Manual

Using the VA< • buttons to select the
Current Date and Current Time, and then
press the ENTER button.
W'hen thc current time is stored in memory and
then the set is powered off, the current time will
appear in the front panel displa}:
II 3. Channel Set
WA : Sets the value
You can set the value using the number (0~9)
buttons.
_1 _: Moves to items
IOTI
Select Setup using the At' buttons, then
press the ENTER or • button.
• If any of number buttons on the remote
control do not operate, press the DVD
button and try again.
Select System using the AV buttons, then
press the ENTER or • button.
Select Channel set using the AV buttons,
then press the ENTER or • button.
Select Antenna/Cable TV(Signal Source)
using the AV buttons, then press the
ENTER or • button.
English
-25