Channel Set - Samsung DVD-HR753 Instruction Manual

HDD & DVD RECORDER
HDD
Auto Setup
Library
Manual Setup
Timer Record
Disc Manager
Setup
m MOVE s SELECT
Auto Setup
Please wait.
PR
01
02
03
04
05
06
07
Edit
PR
CH
Name
MFT
m MOVE
Downloaded From Disc-Player.com Samsung Manuals

Channel Set

|
|
r RETURN e EXIT
3%
Stop
Manual Setup
CH Name
002 - - - -
004 - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
Delete Swap
Manual Setup
01
002
- - - -
Save
s SELECT
Channel Set
Auto Setup
This feature allows you to manually set the HDD & DVD
RECORDER tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the OK or ►
2.
button.
Press the ▲▼ buttons to select Channel Set, then press the OK or
3.
► button.
Press the ▲▼ buttons to select Auto Setup, then press the OK or
4.
► button.
The message "Your data will be lost. Press [OK] to continue,
[RETURN] to exit." is displayed.
5. Press the OK button. Channel scan will be started.
• The fi rst frequency band is scanned and the fi rst station found is
displayed and stored. And the HDD & DVD RECORDER
searches for the second station and so on.
• The number of stations automatically stored by the HDD & DVD
RECORDER depends on the number of stations that it has found.
M

Press the OK button to stop the Auto Setup
Manual Setup
You can add preset channel that Auto Channel Search missed.
And you can delete a channel you wish to remove. You can
programme the order of channels.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the OK or ►
2.
button.
Press the ▲▼ buttons to select Channel Set, then press the OK or
3.
► button.
Press the ▲▼ buttons to select Manual Setup, then press the OK
4.
or ► button.
Press the ▲▼ buttons to select a PR(programme) you wish to edit,
5.
delete, or swap, then press the COLOUR button.
Select Edit, Delete or Swap.
• In case of Edit (RED(A) button) : You can add or edit
PR(programme) information. After change PR informations (CH.,
Name, MFT), select Save, then press the OK button.
- CH : Tune the channel using ◄► buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name
by using ▲▼◄► buttons.
- MFT(Manual Frequency Tunning) : You can tune up the
channel frequency better using ◄► buttons.
• In case of Delete (GREEN(B) button) : the channel information
of selected PR(programme) will be removed.
English - 27