Table of Contents
Advertisement
REMOTE OPERATION OF ANSWERING SYSTEM
Remote operation allows you to control the functions of the Answering System when you
are away from the Base,and call from an outside telephone line. The Answering
System cannot be accessed from another telephone on the same line. You can access
many of the Answering System functons from a remote location, such as
messages, changing recorded announcements, and recording memos.
Remote operation can only be accessed from a touch tone telephone. If the remote phone
is set to pulse dialing, switch it tone. If tone dialing is not available, you will not be able
to access the Answering System.
Note: All function codes should be entered within 2 seconds in order to activate Remote
Operation.
To Activate Remote Operation From a Different Telephone Line
1.
If the Answering System is OFF, you can dial your telephone number and wait for
the Answering System to answer your call after 10 rings. An announcement, "Please
enter your security code" is given, and you enter your security code to use remote
operation.
2.
If the Answering System is ON, it will answer your call and begin playing the currently
selected announcement (as with any incoming call).
3.
Enter
#
followed by your 2 digit security code during the announcement. The
default security code is 19.
4.
Once the security code is received, a double confirmation beep will be given, and
you are in Remote Operation mode. You can then control the Answering Machine
functions using the telephone keypad.
5.
The user can also enter the Remote Operation mode during message recording. The
procedure is the same as step 3. The recording will be stopped after entering the
valid security code "s#xx " and the incomplete message will be deleted. If "
is entered, the Answering System will release the line, but the recorded message
will still be retained.
6.
If the user enters a wrong security code, the system will release the line.
Playing Messages Remotely
1.
Press " #1 ", " #2 " or " #3 " on the touch tone keypad to play the messages in the
corresponding mailbox.
2.
The system will announce "Mailbox X. You have XX new messages and XX old
messages" and the system will playback the new message only. If there are no new
messages, the system will announce "Mailbox X. You have XX old messages. On
the other hand, in the absence of old messages, the system will announce only the
number of new messages.
Repeat Messages During Playback
1.
Press "#4" once during message playback to repeat the current message.
2.
Press "#4" twice within 2 seconds to skip to the previous message.
Skip Messages During Playback
29
listening to
0s"
Advertisement
Table of Contents
