Table of Contents
Advertisement
CALLER ID
This telephone provides two types of Caller ID on both the Handset and the Base Unit:
Caller ID: Displays the name and number of each caller after the phone begins ringing
(requires Caller ID service from your telephone company).
Caller ID on Call Waiting: Shows the name and number of each caller on Call Waiting after
you hear the Call Waiting tone (requires Caller ID on Call Waiting service).
A NEW CALL light will flash on the Base Unit to alert you to new CID records. Once the new
caller ID records have been reviewed on the Handset, the NEW CALL light will go out.
NOTE: Caller ID and Call Waiting Caller ID are subscription services, available through
most local phone service providers. You must subscribe to these services to benefit
from the Caller ID features of this phone. Contact your local phone company for
details.
The phone has a Call Log, which stores the name, number, date, and time of the last 50
calls received. You can review the Call Log to see who called while you were out. You can
speed-dial numbers from the Call Log. And you can store names and numbers from the
Call Log into your directory.
REVIEWING THE CALL LOG
With the Handset OFF:
1. Press
or
viewed) calls.
2. Continue to press
Some locations are not equipped to send Caller ID infor-
mation when a person places a call. When you receive
calls fromsuch locations, your phone will display UNAVAILABLE.
If a caller purposely blocks their phone number from being delivered by Caller ID, your phone
will display PRIVATE.
HINT: If a
follows the phone number it indicates the party has called more than once.
ERASING CALLS
To erase a call; with the Handset OFF:
• Press
or
• Press SELECT.
• Press
until ERASE is blinking. Press SELECT.
• Press
until YES is blinking.Then press SELECT.
To erase your entire Call Log; after you have viewed all calls and the handset is off:
• Press
or
• Press SELECT.
• Press
until ERASE is blinking. Press SELECT.
• Press
until ALL is blinking.Then press SELECT.
The handset displays:
• Press
until YES is blinking.Then press SELECT.
. You will see the number of NEW (not viewed) and OLD (previously
or
to review the callers.
until you see the call
until you see any call in the log.
you want to erase.
15
Advertisement
Table of Contents
