BASIC OPERATIONS
REDIAL/PAUSE
From the Handset: Your VT 2931 Handset remembers the
last 5 phone number you dialed. With the Handset off, press
REDIAL/PAUSE. The Handset will display:
This is the last phone number dialed from the Handset. Press
the previous numbers dialed. Once the desired number is displayed on the Handset, press
the appropriate LINE key to dial.
.
ANSWERING CALLS
From the Handset: 1. Press the flashing LINE key . The
LINE key will glow steadily and the Handset will display:
2. The Base Unit will display HANDSET IN USE, and the
corresponding LlNE key will blink.
3. Press OFF to end your call .
From the Base : 1. Press the flashing LINE key. The LINE key
will glow steadily and the Base Unit will display:
2. The corresponding LINE key on the Handset will blink while
the Speakerphone is in use.
3. Press OFF to end your call.
VOLUME KEYS
While the Handset or Base is on a call, the corresponding display will show the approximate
duration of that call. This is very helpful in monitoring long distance expenses.
HOLD
To place a call on hold, press HOLD on the Handset or Base, whichever you are using.
HOLD will be displayed on the corresponding screen.
To return to your call, press the appropriate LINE key.
HANDSET VOLUME
Adjust the Handset volume with the
the side of the Handset.
The Handset will display the relative volume level as you adjust it.
SPEAKERPHONE VOLUME
Adjust the Base Unit volume with the
the right of the dialpad. The Base will display the relative volume
level as you adjust it. The Speakerphone volume can only be
adjusted while the Base Unit is IN USE (in Speakerphone or Inter-
com mode).
CALL TIMER
12
or
to scroll through
and
keys, located on
and
keys, located to