Hohem iSteady Mobile+ User Manual page 11

Why the phone app cannot be connected with the gimbal via Bluetooth?
First, enable the Bluetooth on your phone (enable ONLY). Then turn on the gimbal. After
that, launch the Hohem Joy app and connect Bluetooth in the app through pop-up
prompt or Bluetooth search interface. The device name is "iM5-xxxxxx"). Click the device
to connect to it. It is important that the Bluetooth connection is established using the
app. If the connection fails, please exit the app, restart the Bluetooth, follow the above
steps and try again.
To delete all paired Bluetooth devices, push the slider up while simultaneously pressing
the mode button.
Some connections with Android phones fail due to restrictions from the phones side. In
that case, be sure that the Android phone has location services enabled and that the
app has location services enabled.
Parameters
Weight
Main Material
Payload
Mobile Width Supported
Battery Capacity
Working Time
Charging Time
Mechanical Range
Working Temperature
Motors Protection
Standard Accessories
474g including battery
Hight performance composite
280g
58mm~89mm
3600mAh
13 hours
2 hours
Panning: 600°
Rolling: 320°
Tilting: 320°
-10~45°C
Gimbal is able to power off automatically
due to improper operation of the motors.
Tripod, Carry case, Type C Charging Cable
11