Answering System Operation At The Base; Audible Indicators; Setting Date/Time; About Mailboxes - VTech TeleZapper VT 2568 User Manual

Vtech vt2568: user guide
Table of Contents

Advertisement

ANSWERING SYSTEM OPERATION
AT THE BASE

Audible Indicators

This system gives you voice prompts for feature operations and voice
confirmations when you press a button or complete an operation.

Setting Date/Time

1. Make sure the answering system is on.
2. Press TIME/SET . The system announces the clock setting then an
nounces; "To set Date and Time, press TIME/SET ."
3. Press TIME/SET .
4. Press SELECT until the system announces the correct day, then press
TIME/SET .
5. Press SELECT until the system announces the correct hour, then
press TIME/SET .
6. Press SELECT until the system announces the correct minutes
(press and hold SELECT to advance by 10), then press TIME/SET .
The system announces the current clock setting.

About Mailboxes

This answering system has three voice mailboxes. Callers using a touch
tone phone can select the mailbox in which their messages will be
recorded by pressing
Mailbox 1.

About Announcements

You can record up to two different announcements — one for normal
answering and one for when you've set the system to play the announcement
only.
Use normal answering when you want the system to record callers'
messages. Use Announce Only when you want to give information to
callers without accepting messages.
If you choose not to record an announcement, the system answers with
a pre-recorded announcement.
The normal answering pre-recorded announcement says: "Hello. I'm unable to
answer your call right now. Please leave your name, number and a
message after the tone." The Announce Only pre-recorded announcement
says: "Hello, I'm unable to answer your call right now. Please call again.
Thank you."
By setting Announce Only to ON or OFF, you decide which announcement
your callers will hear when the system answers a call (the system comes
set for normal answering , with Announce Only turned off). See "Set
Announce Only" , located in the Feature Summary chart later in this sec-
tion, to change your announcement selection.
1
2
3
,
, or
. All other messages will be recorded in
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

2568

Table of Contents