Table of Contents
Advertisement
4 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12 hours
the first time.
5 Check for dial tone.
After the batteries are charged, pick up the handset and press
;you should hear a dial tone.
6 Set the dial mode.
If you have touch tone service, the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial mode.
PROG/CHAN
•
Press
•
Press
currently selected mode.
•
Press SELECT . The current setting blinks.
•
Press
SELECT
•
Press
on the handset to enter programming mode.
or
until the screen displays
to select
, to save the displayed mode.
INSTALLATION
or
.
7
PHONE
and the
Advertisement
Table of Contents
