Replacing The Handset Battery Pack - VTech TeleZapper VT 2568 User Manual

Vtech vt2568: user guide
Table of Contents

Advertisement

BATTERIES

Replacing the Handset Battery Pack

1
Remove the battery compartment cover on the handset by pressing
on the indentation and sliding the cover downward.
2
Lift out the old battery pack and disconnect.
3
Align the two holes in the new battery pack's plug with the socket pins,
and snap the plug into place. Place the battery pack in the compartment
with the wires in the lower left corner, along the bottom of the battery
pack.
4
Replace the cover by sliding it up into place.
5
The new battery pack must be charged before using the phone. Place
the handset in the base and allow it to charge for at least 12 hours
the first charge. The telephone might operate before that, but for best
performance, let the battery pack charge fully.
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

2568

Table of Contents