AEMC 6417 User Manual page 38

Clamp-on ground tester

Hide thumbs Also See for 6417:

1.888.610.7664

DataView is a software program that enables a computer to connect to and

interact with a variety of AEMC instruments, including the Model 6417. As its

name implies, a primary purpose of DataView is to view data that has been

recorded by the instrument and displayed on the computer.

With DataView you can:

Connect the computer to the instrument

Download data

Display and analyse data

Generate reports

Export to a spreadsheet

When you purchase an AEMC instrument supported by DataView, the software is

USB stick.

The user must have Administrative access rights to install

DataView. The user's access rights can be changed after installation is

complete. DataView

must be installed for each user in a multi-user system.

Insert the DataView thumb drive into an available USB port on your

computer. If Autorun is enabled, an AutoPlay window appears on your

Autorun is not enabled or allowed, use Windows Explorer to locate and open

the USB drive labeled "DataView."

directory of the USB drive, and double-click it to run the installation program.

The DataView setup screen appears. In the upper left corner of the screen,

choose the language version of the Setup interface. (All Setup screens and

dialogs will immediately appear in the selected language.)

In the lower left corner are the available installation options. In addition to the

DataView software, you can select "Adobe Reader." This links to the Adobe

web site where you can download the latest version of Reader.

www.calcert.com

Clamp-on Ground Resistance Tester Model 6417

sales@calcert.com