AEMC 6417 User Manual page 26

1.888.610.7664
1. Rotate the rotary switch to the MR or Setup position.
2. Press and release the
When Bluetooth (BT) is ON the Bluetooth icon ( ) appears at the bottom of
the display. This icon is steady when Bluetooth is enabled but not connected
to the computer, and blinks when connection is established.
To turn Bluetooth OFF, repeat the steps 1 and 2.
Once Bluetooth is ON you can rotate the rotary switch to any position (except
OFF) and the Bluetooth will remain ON.
The instrument can be turned OFF in two ways:
Turn the rotary switch to OFF.
This function activates after 5 minutes of no activity (no
button press, no change of switch setting, and no opening of the jaws).
Fifteen seconds before Auto Power OFF, a short audible signal is emitted
and the display blinks once a second.
Auto Power OFF can be disabled in
symbol is then displayed.
The instrument has two modes.
Makes the standard loop resistance and leakage current
measurements.
Advanced Mode:
Impedance at the selected frequency.
Contact voltage.
Resistive and inductive components of the loop impedance.
The choice of Standard or Advanced mode and the alarm thresholds are
(see
www.calcert.com
15
10 20
5 25
0 30
button.
(see 4.4, menu #3). The
4.4, menu #9).
Clamp-on Ground Resistance Tester Model 6417
sales@calcert.com