Lifescan FreeStyle Owner's Booklet page 21

5
Removing the Lancet
When you have finished testing, snap off
the cap from the lancing device.
Hold the lancet over a sharps container
or a puncture-proof container with a lid.
Pinch the white clip that holds the lancet
until the lancet falls out.
Potential Bruising
It is possible you may experience bruising
at the test site. If bruising does occur, you
may choose to lance your finger or another
site instead of your arm. Refer to page 1
for instructions on testing other sites.
Maintenance
Use isopropyl alcohol or soap and water
to wipe the outside of the lancing device.
If you wish, remove the cap, wash it in
warm water and rinse well.
Important: Do not immerse the body of the
lancing device in water or any other liquid.
34
33
Call Customer Service Toll Free at 1-888-522-5226 www.therasense.com
LifeScan, Inc.. Ex. 1010 - Page 21
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00712 - U.S. Patent No. 8,840,635