Appendices; Meter Screen Displays - Lifescan FreeStyle Owner's Booklet

Appendices

Meter Screen Displays

Setting Up Your Meter
• To Enter Setup Mode
Start with the meter off (and no test strip inserted). Press and firmly
hold the "m" (mode) button until the set display screen appears.
• To Exit at Any Time
Press and hold the "m" button until the meter powers off.
• To Move Through the Screens
Press the "m" button to move through all the setup screens such as
sound level, time, date, and so on.
Press the "c" (configure) button to change setting within a setup screen.
Example: Use the "m" button to bring up the blinking unit of
measurement display screen. Press the "c" button to select the
desired Unit of Measurement; mg/dL (U.S. Standard) or mmol/L.
37
Call Customer Service Toll Free at 1-888-522-5226 www.therasense.com
Setting the Sound
There are three sound volume options to let you
know when the test strip is full, when the reading
is done, and when an error occurs: Off, Low,
and High (default setting).
OFF
1. Press the "c" button until the desired sound
level appears.
2. Press the "m" button to move to "Setting
the Time."
LOW
HIGH
LifeScan, Inc.. Ex. 1010 - Page 23
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00712 - U.S. Patent No. 8,840,635
38