Dial A Displayed Number; Store A Call History Record In The Directory; Display Screen Messages - VTech TELEZAPPER VT 2528 Operating Instructions Manual

CALLER ID OPERATION
4 Press or
5 Press SELECT. You will hear a series of beeps confirming the deletion.

Dial a Displayed Number

1 Locate the record in call history that you want to dial.
2 If you wish to change how the number is dialed, press # .
The screen displays any alternate dialing sequences available for this call (area code
+ number; 1 + area code + number; 1+ number; number only).
3 Press SELECT, then press
The phone number will be displayed in the format it was received.
4 Press SELECT when the number is correctly displayed for dialing.

Store a Call History Record in the Directory

1
Locate the record in call history you want to store in memory.
2 If you wish to change how the number is stored, press # . The screen displays
any alternate dialing sequences available for this call (area code + number; 1 +
area code + number; 1+ number; number only).
3 Press SELECT, then press
The phone number will be displayed in the format it was received.
4 Press SELECT four times to store the call record in memory. You'll hear a beep
confirming that the name number were stored.

Display Screen Messages

Screen Displays:
YES
until flashes.
or
or
When:
The other party is blocking name information.
The other party is blocking name and number
information.
Your phone company is unable to receive information
about this caller s name.
Your phone company is unable to receive information
about this caller s name and number.
DIAL
until flashes.
PGM
until flashes.
16