Edit A Number/Name Stored In Memor; Delete A Number/Name Stored In Memory; Dial A Memory Number - VTech TELEZAPPER VT 2528 Operating Instructions Manual

TELEPHONE MEMORY
8 Press or
to alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose
9 Press SELECT or PROGRAM to confirm your selection. If you choose Y, a
will be displayed with the directory entry.
Note: When memory is full the screen displays
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in Memory
1 Press MEM . The screen displays
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit, press SELECT. Then
press or
4 Press SELECT. The screen displays the name and number. The flashing cursor
appears at the end of the name. Use
name. Press SELECT to move on to edit the number. Press SELECT to move
on to edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.

Delete a Number/Name Stored in Memory

1 Press MEM . The screen displays
2 Press the memory location key of the entry you wish to delete.
3 When the screen displays the number you want to delete, press SELECT. Then
press or
4 Press SELECT. The screen displays
5 Press or
6 Press SELECT.

Dial a Memory Number

1 Press MEM . The screen displays
2 Press the memory location key of the entry you wish to dail.
3 When the screen displays the number you want to dial, press SELECT. Then
press or
4 Press SELECT. The phone automatically dials the number.
to change the setting. Choose
N
(for NO) for a normal ringing pattern.
EDIT
until flashes.
ERASE
until flashes.
YES
until flashes.
DIAL
until flashes.
Y
(for Yes) if you wish the phone
MEMORY FULL
ENTER 0-9
.
, and the dial pad keys to edit the
ENTER 0-9
.
ERASE NO YES
ENTER 0-9
.
12
, an error tone
and the number.
D D D D D