Advertisement
1-
30
6. CONNECTING
AV
PROCESSOR
The equipment used to provide special effects to the video image
and to sound are called AV processors
Connecting an AV Processor that Adds Special!
Effects for Picture
A telopper or a color corrector are used to provide visual effects,
for example
PROCESSOR
IN RA, L
to audio outputs
to video output
Telopper
+ Color corrector etc
PROCESSOR IN V
PROCESSOR
OUT V
PROCESSOR OUT R, L
to video input
to audio inputs.
Connecting an AV Processor that Adds Special
Effects for Sound
A graphic equalizer is used tor auditory effects, for example
to audio outputs
Graphic equalizer, etc.
to audio inputs
PROCESSOR OUT RF, t
Using an AV processor with the S video jacks
Cannect the S video jacks of this unit and the AV processor, in addition to
the connections shown in ihe above diagram
Using an AV processor without video or audio input/output
When editing with the AV processor. press either bution of the PROCESSOR
PASS buttons,
AUDIO or VIDEO. which are not provided in the processor
The corresponding indicator wilt light up. Press the VIDEO button when
using a graphic equalizer that has no video jack, tor example
1-7. CONNECTING
AUDIO
SYSTEM
lf an audio system 1s connected to the AUX iN jacks, you can
record the sound from the audio system while editing the video
image. which is called
"after-recording."
to audio outputs {line outputs, recording outputs, etc.)
AUX IN RL
OOOO
alslelaloje
alelalsioie
AIAHOGHTO
Connecting an audio system to the INPUT jacks
The audio system also can be connected, as an audio source. to one of the
INPUT
1_- 6 jacks of this unit.
tn this case. perform editing in mode C and
select only the audio signa! from the INPUT jacks where the audio system is
connected.
See page 48 tor details.
a
Audio system, etc.
Advertisement
