Advertisement
14
Rear panet
Refer to pages 24 to 32 for connections.
(i) INPUT [ij-{6} S VIDEO/VIDEO/AUDIO
Jacks (4-pin mini DIN/phono jack)
{2? PROCESSOR IN (processor input) S
VIDEO/VIDEO/AUDIO jacks (4-pin mini
DIN/phono jack)
"3) PROCESSOR OUT (processor
output) S VIDEO/VIDEQ/AUDIO jacks
{4-pin mini DIN/phono jack}
14} OUTPUT [1'-:6! S VIDEO/VIDEO;
AUDIO jacks (4-pin mini DIN/phono
jack)
[5; MONITOR OUT (monitor output) -2/
S VIDEO/VIDEO/AUDIO jacks (4-pin
mini DIN/phono jack)
Outputs composite video signal when
composite video signal is input. or
outputs S video signal when S video
signal is input
[6] MONITOR OUT (monitor output) '1:
connector
(21-pin)
Outputs both video and audio signals.
If the composite video signal is input,
the Y/C separated signal can be output
trom this connector with the VIDEO/S.
VIDEO selector at the S VIDEO
position.
[7] VIDEO/S VIDEO selector
When the connected monitor accepts S
video signal, set the selector to S
VIDEO.
if not, set it to VIDEO.
[8] CONTROL S input/output jacks (mini
jack)
Connect to Sony video equipment
having the CONTROL S inpuvoutput
jacks.
For connection, use an optionally
available Sony connecting cord RK-
G69
{9} AUX IN (auxiliary input) jacks (phono
jack)
Function of the S VIDEO INPUT/OUTPUT jacks
A liner and clearer picture can be obtained in both
recording and playback with the use of the S
VIDEO jacks.
The S VIDEO NPUT/OUTPUT
jacks input and oulput separately the Y
(luminance) and the C (calor) signa! of the video
signal, which minimizes the loss of both signals.
when recording and playing back a picture
This unit incorporates the circuit that separates
the Y and the C signals.
The signal input from the
video equipment without S video jacks can be
wansformed ito the S video signai and output to
video equipment with the S video jacks. See
page 48 for details
Remote sensor
Approx.
7
Use the remote commander within this range.
Apprhx. 30
| Remote Commander
|
Commander
Refer to pages 62 to 63 for operation using
the remote commander.
[1] CLEAR button
[2] MEMORY buttons (M1/M2/M3/M4)/
SET (memory set) button
[3} AUDIO ATTENUATOR V4 buttons
Press W to increase the volume on the
MONITOR [1] output, or press & to
decrease volume.
[4] POWER switch
Press to turn the unit on or off when the
POWER switch on the main unit is set
to ON.
[5] MONITOR [1} select buttons
{6] MONITOR [2] select buttons
[7] INPUT/OUTPUT '1] (monitor {1} in,
output select) button
8| INPUT/OUTPUT 2; (monitor (2) input/
output select) button
[9] AUDIO MODE selector
{10} MUTING buttons
16
Advertisement
