Advertisement
Control signal
indicator
Refer to pages 62 to 63 for operation using
the remote commander.
[11] MODE LOCK button (ON/OFF)
(12] MATRIX button
Press this button first when selecting
the equipment for input/output
(13) CANCEL button
Press to cancel an operation in which
two or more buttons of the remote
commander
are pressed in sequence.
'14)
V+ S (composite
+S video
transforming) switch
ss] AUX AUDIO selector
|16) PROCESSOR
selector
{11) PROCESSOR PASS buttons (VIDEO/
AUDIO)
ina) MODE C V/A (mode C video/audio)
selector
Press to input only the video or audio
signals trom the input equipment.
This
button functions only when the
OUTPUT MODE switch on the main unit
is set to C
{1a) (1) - [6] (jack number) selectors
Press to seiect the jack for inouYoutput.
Use these selectors together with the
MATRIX button, the V+ S switch, the
AUX AUDIO or the PROCESSOR
selector on the remote commander.
For
details, see page 62.
[20] FRONT/REAR (jack (8} front/rear
select) button
Installing Batteries
1 Open the tid.
2 Install two R6 (size AA) batteries with
the correct polarities, and close the
lid.
Battery life
About six months of normal operation can
be expected when using the Sony SUM-
3(NS) batteries.
When the batteries are
cun down, the remote commander will not
operate the unit. In this case, replace both
batteries with new ones.
Notes on the remote commander and
remote control operation
+ Keep the commander away from
extremely hot of humid places.
+ Avoid dropping any foreign objects into
the commander casing, particularly when
replacing the batteries.
+ To avoid a malfunction, do not
simultaneously depress two or more
buttons.
* Avoid exposure of the remote sensor to
direct sunlight of lighting apparatus.
Such exposure can cause a malfunction,
20
Advertisement
