Edit A Number/Name Stored In The Directory; Delete A Number/Name Stored In The Directory; Dial A Number From The Directory - VTech t 2453 User Manual

Telephone Directory
8. Press or PROG to confirm your selection. If you chose Y, a
SELECT
displayed with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds,
and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory

1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through the entries stored in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press
or until EDIT flashes.
SPEED SPEED EDIT EDIT ERASE ERASE
SPEED SPEED SPEED EDIT EDIT EDIT ERASE ERASE ERASE
8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1
4. Press SELECT. The screen displays the name and number. The cursor ap
pears at the end of the name. Use
name. Press SELECT to move on to edit the number. Use
space and make corrections. Press SELECT to move on to edit the dis
tinctive ring setting.
5. Press SELECT to save the edited information.

Delete a Number/Name Stored in the Directory

1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press
press or until ERASE flashes.
SPEED SPEED EDIT EDIT ERASE ERASE
SPEED SPEED SPEED EDIT EDIT EDIT ERASE ERASE ERASE
8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1
4. Press SELECT . The screen displays ERASE NO YES and the number. The current
choice flashes.
5. Press or until YES flashes.
SELECT
6. Press . You'll hear a confirmation beep.

Dial a Number from the Directory

1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
18
D D will be
. Then press
SELECT
, and the dial pad keys to edit the
to back
SELECT . Then
Telephone Directory
-OR-
Press the dial pad key for the first letter of the entry you want to dial.
3. When the number you want to dial is displayed, press PHONE.
Move a Number/Name to the Memory
1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through directory.
— OR —
Press the dial pad key for the first letter of the entry you want to move.
3. When the screen displays the entry you want to move, press SELECT. Then press
until SPEED flashes.
SPEED SPEED SPEED SPEED SPEED EDIT EDIT EDIT EDIT EDIT ERASE ERASE ERASE ERASE ERASE
8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1 8 0 0 5 9 5 9 5 1 1
01 01 01 01 01
4. Press SELECT. The screen displays ENTER 1-9.
5. Press the key (1 through 9) to move this entry from the normal directory to the
speed dial memory and assign the memory location. You'll hear a confirmation beep. A
memory location number (01 through 09) will be displayed with this entry.
19