Answering System
- Remote Access
Connect with the Answering System
You can access many features of this system remotely from a touch tone phone.
1. Dial your telephone number.
2. When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3. Enter a remote command (see Remote Access Commands).
4. Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
*
5 to hear the menu while remotely connected to the answering system
Remote Access Commands
Function:
Command:
#
Play messages in
Press
, then the appropriate mailbox
a mailbox
number (1,2, or3). The system plays
new messages. If there are no new messages,
the system plays old messages.
Repeat a message
Press #4 while message is playing; press
#4#4 to back up previous message.
Skip a message
Press #6 while message is playing;
each press advances up another message.
Stop
Press #5 .
Save messages
Hang up.
Delete message
Press #9 while message is playing.
Review announcement
Press #7 ; system plays announcement,
then beeps.
Record announcement
Press *7 ; after beep, record announcement,
press #5 to stop. System plays back
announcement.
28
Answering System
Remote Access Commands
Function:
Function: Command:
Record memo
End remote access call
.
Turn system off
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote access, the
voice menu will be announced. After the voice menu announcement, if no key is
pressed within 20 seconds, the remote access call will automatically end.
- Remote Access
(continued)
Command:
Press *8 , then mailbox number where
you want memo recorded; speak after
beep; press #5 when finished.
Press *0 .
Press #0; the system announces,
" A nswering machine off." Press # 0
again to turn the system back on.
When system is off, it answers after 10
rings and announces, " P lease enter your
security code." Enter your remote access
code.
29