Table of Contents
Advertisement
5. Connecting cabinets
Push the cabinets together. Make sure the guiding
pins and the canopy brace slide into their
corresponding slots on the end cabinet.
Connect line cabinet to end cabinet at the base using
a bolt sleeve, bolt (M6 x 100 mm), M6 nut
And Ø 40 mm washers.
Note!
Insert the bolt sleeve from the end cabinet's side.
9
EN DE ES FR PL RU NL FI SV NO DA EE LT LV
Remove the bottom plates at the end of line cabinets.
Remove the honeycombs at the end of each line
cabinet. Loosen the screws holding the retaining strip
in place. Push the retaining strip back and remove the
honeycomb strip.
Advertisement
Table of Contents
