Upgrade Kit; Tools Required - Sun Microsystems Ultra 1 Series Upgrade Manual

1

Upgrade Kit

Tools Required

2
3. Read Chapter 3, "System Board and Component Replacement" for
directions about installing the Sun Ultra 1 Model 200E Series motherboard
in the system chassis, and replacing DSIMMs (memory modules), the
NVRAM/TOD chip, SBus cards, and the Creator framebuffer card on the
upgrade system board.
4. Connect the monitor, keyboard and mouse, and any external devices to the
upgraded Sun Ultra 1 Model 200E Series system as shown in the Sun Ultra 1
Series Hardware Setup Instructions.
5. Pack the old system board, following the instructions in the RMA
information package about packing.
6. Return the old system board to Sun, as directed by the RMA information
package documents.
If you have any additional questions, contact your Sun sales representative.
The upgrade kit contains an electrostatic discharge (ESD)kit, part number
560-1302-xx, so you can safely handle parts that are sensitive to static electricity
damage. The ESD kit includes a plastic antistatic mat, and a conductive wrist
strap (packed in a white envelope).
You will need the following tools and equipment:
•
Antistatic mat (included in upgrade kit)
•
Foamblock spacer and template (included in upgrade kit)
•
Front card guide (included in upgrade kit)
•
Wrist strap (included in upgrade kit)
•
Phillips screwdriver
•
Longnose pliers
•
Container for screws
Sun Ultra 1 Series to Sun Ultra 1 Model 200E Upgrade Guide—July 1996