Table of Contents
Advertisement
2. Carefully lift the end of the lower
heating element by a few centimetres
and clean the bottom of the oven.
Put the heating element back into its seat
when finished. Wait until the oven cavity is
completely dry before putting back the
accessories.
4.4 Extraordinary maintenance
Replacing the internal light bulb
Live parts
Danger of electrocution
• Unplug the appliance from the mains.
The oven is fitted with a 40W light
bulb.
1. Completely remove all accessories
from inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool
(e.g. a screwdriver).
Take care not to scratch the
enamel of the oven cavity wall.
Cleaning and maintenance
4. Slide out and remove the light bulb.
Do not touch the halogen light
bulb directly with your fingers, use
an insulating material.
5. Fit the new light bulb.
6. Refit the cover. Ensure the moulded part
of the glass (A) is facing the door.
79
Advertisement
Table of Contents
