Registration; To Register A Handset - VTech mi6803 User Manual

Registration

To register a handset

When first purchased, all accessory handsets show NOT REGISTERED
on the screen . To register a handset:
 . Place the handset in a charger which is connected to the power
socket . If PRESS FIND HNDST 4 SEC ON BASE does not appear
on the screen after a few seconds, lift up handset and place in the
charger again .
2 . On the telephone base:
• Press and hold FIND HANDSET for four seconds .
• Release FIND HANDSET once the IN USE light comes on .
on mi6866 telephone base
on mi6879 telephone base
After a while the handset will emit a series of tones, and the newly registered handset will be
assigned the lowest extension number not previously assigned to another system handset (-4)
when successfully registered . Repeat steps  and 2 if the new handset does not successfully
register to the telephone base within two minutes .
Four
seconds
later:
Four
seconds
later:
www.vtechphones.com
NOT REGISTERED
• The handset
number is used
as the extension
number .
• When first
PRESS FIND HNDST
purchased, the
4 SEC ON BASE
new handsets
need to be
charged for five
minutes before
registering to the
telephone base .
• If the registration
is not successful,
lift all handsets
out of their
charger and
place them back
in the charger . Try
the registration
process again .
7