VTech IS6110 User Manual page 6

Installation
Telephone base installation
Step 3: Turn power on
Plug the telephone base power adapter into the power port
located on the back of the S6110 telephone base and the
other end into an electrical outlet not controlled by a wall
switch This turns the telephone base on Do NOT interrupt
the installation process by unplugging the power adapter
or by using the handset until the POWER indicator light
on the front of telephone base is lit steadily
Step 4: Check diagnostic lights
The POWER light should be lit indicating the power is
on
Telephone base
(front view)
www.vtechphones.com
• Use only the
power adapter
provided in this
package; using
any other power
adapter could
damage the
telephone
5