Handset Settings; Ringer Volume; Ringer Tone; Key Tone - VTech ip5850 User Manual

Handset Settings

Ringer Volume

• From the idle (OFF) mode, press SEL then
or key to RINGER VOLUME.
• Press SEL again. The current ringer volume
will be shown:
• Press or
desired ringer volume. The current ring tone is
played and the volume bar is increased/de-
creased each time the setting is adjusted. At
the lowest setting, display will show:
NOTE: The Handset will not ring when a call comes
in if Ringer Volume is set to the lowest setting.
• Press SEL to confirm the setting.

Ringer Tone

• From the idle (OFF) mode, press SEL then
or key to RINGER TONE.
• Press SEL then you are prompted to choose
INTERCOM CALL or OUTSIDE CALL. Press
or keys to select the desired option.
• Press SEL again. You can then use
keys or enter digit 0-9 to sample the ring tone.
The screen, for example, will show:
• Press SEL to confirm your setting.
Key Tone (preset to ON)
• From the idle (OFF) mode, press SEL then
or key to KEY TONE.
• Press SEL again. The current setting will be
shown. Press
OFF. When set to ON, the Handset will emit a
beep whenever a key is pressed.
• When the desired option is shown, press SEL
keys or enter digit 0-6 to the
or keys to scroll to ON or
21
or