Advertisement
Step 4: From the iServer 2 webserver interface, click the System tab on the upper right of the screen. A System
Configuration pop-up window will appear.
Figure 3: Webserver UI System tab
Step 5: Click the Download Firmware button. Note that two download links will appear.
Important: iServer 2 devices require two firmware files to complete the firmware upgrade process: a .bin and .hex
file. Both download URLs should appear when the user clicks the Download Firmware button.
iServer 2 devices that are using an older firmware version may only have one download link appear at a time. In
case only one firmware link appears, proceed to download and install the file according to the steps outlined in
the rest of this section and the following section, then clear the web browser cache being used, and finally repeat
the process starting from Step 5 of this section, until the iServer 2 firmware is up-to-date.
Figure 4: System Configuration pop-up window, Download Firmware button
Downloading the Latest Firmware
5
Advertisement
