Setup
Installation Without A Router
Handset 1 & 2
NOTE:
The IP800 series telephone is
expandable up to a total of 4 handsets.
Uses model IP 8 (sold separately)
Warning: Do not route the Ethernet cable to outdoors, and ensure that you are
using a safety approved DSL or Cable modem with proper electrical isolation
S
TEP 1
Unplug the power cord from your Cable or DSL modem (the device your ISP
provided which provides high-speed Internet). Make sure that you turn your
computer off and that you do NOT plug in your IP800 series broadband tele-
phone until instructed to do so.
Helpful Hint: The modem should be powered off for at least 0 minutes. If it is
turned off for a shorter period of time, it may "remember" old information that will
prevent it from working properly.
INTERNET
dSL or Cable Modem
WAN Port
7
PC/LAN Port
Base Unit
PC
.