Advertisement
www.insigniarange.com
Last Modified: 07/10/2015
1
Step 4
2
Apply silicone to the bottom of the remaining back panel and position the panel to the
completed front frame in the position shown in the image marked "1"
Once you have met the back panel inside the front upright as per the close up image
1
walk the panel around to the position shown in the image marked "2"
Now repeat for the other side
Step 5
Now you have locked the two back panels in position, silicone the bottom
of the column and align the back panels to the central column. Once you
are happy with the alignment, run a bead of silicone up the edge of the
column and fix together using the ST20 screws and SW9 Washers as
per the image.
(please note, if your column has a rubber seal at the bottom , take the
rubber off and apply silicone inside the rubber and replace)
11
Advertisement
