Table of Contents
Advertisement
Assembling the filters
When you get the filters separately, assemble them as
shown in the figure.
Fig.43
► 1 . Powder filter 2. Damper 3. Prefilter
Installing the filter unit
After installing the filters to the top plate, hook the holes
of the filter unit to the U-shaped parts of the inner cover.
Then, lock the latch as shown in the figure.
2
1
3
Fig.44
► 1 . U-shaped part 2. Hole 3. Latch
Installing water filter
Optional accessory
NOTICE:
the water level sensors activate properly.
NOTICE:
using water filter.
To pick up water or wet dust only, the water filter is more
suitable than the powder filter and prefilter.
When installing the water filter, fit the water filter to the
1
top plate same as powder filter and prefilter.
2
3
Fig.45
NOTE: It is recommended that using water filter
when picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
the powder filter and prefilter.
Cleaning the water level sensors
The water level sensors detect liquid when the tank
becomes full with liquid. Clean the water level sensors
with a soft cloth from time to time when changing filters.
2
Fig.46
► 1 . Water level sensor
21 ENGLISH
For picking up wet dust, make sure that
Do not use prefilter and damper when
1
Advertisement
Table of Contents
