Telephone operation
Mute
The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTE/
1.
handset screen shows MUTED for a few seconds and
MUTE appears until the mute function is
turned off.
Press MUTE
2.
The handset screen temporarily shows
MICROPHONE ON.
Ringer mute
When the telephone is ringing, press OFF/
MUTE
to temporarily silence the ringer without
/REMOVE
disconnecting the call. The next call rings normally.
Call waiting
When you subscribe to call waiting service from your
telephone service provider, you hear an alert tone if there is
an incoming call while you are on another call.
Press
to put your current call on hold and take the new
call. Press
at any time to switch back and forth between calls.
Find handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle
1.
handsets ring and the screens show ** PAGING **.
2.
To end paging, press
or press FIND HANDSET on the telephone base.
REMOVE
again to resume the conversation.
/REMOVE
,
on the handset. The
CLEAR
, any dialing keys (0-9, #, *),
14
PHONE
or
RINGER MUTE
0:00:00
MUTED
MUTE