answering system operation
outgoing announcements
An outgong announcement s the message callers hear when calls are
answered by the answerng system.
The telephone s preset wth an announcement that answers calls wth
"Hello, please leave a message after the tone." You can use ths default
announcement, or replace t wth your own.
Play the announcement
• Press aNNC n dle mode. The system announces "Announcement, press
play or press announcement again to record a new announcement."
• Press PLay/SToP and the announcement wll be played.
record your own announcement
• Press aNNC n dle mode, and the system announces "Announcement, press
play or press announcement again to record a new announcement."
• Press aNNC agan and the system announces "Record after the tone,
press stop when you are done."
• After the tone, speak towards the mcrophone at the bottom front of the
telephone base from about nne nches away.
/PLay/SToP when finished.
• Press
• The answerng system wll automatcally playback the newly recorded
/PLay/SToP to stop the playback at any tme.
announcement. Press
Delete your announcement
• Press aNNC n dle mode, and the system announces "Announcement, press
play or press announcement again to record a new announcement."
/PLay/SToP and then press DELETE when the system
• Press
s playng the outgong announcement. The system announces
"Announcement deleted."
www.vtechphones.com
•
The annoucement
can be up to 90
seconds n length.
•
When your
own recorded
annoucement
s deleted, calls
wll be answered
wth the preset
announcement.
31