Outgoing Message For Calls Without Number - VTech VS150 TWIN User Manual

OUTgOINg meSSage fOR CallS wITHOUT NUmbeR

You can set a speciic outgoing message for calls without
numbers. The preset outgoing message for calls without numbers
is a greeting that answers calls with "Hello, please leave your
name after the tone" You can use this default outgoing message
for calls without numbers, or replace it with your own.
To record your outgoing message for calls without number:
1. Press MENU
2. Press or
on the telephone base to scroll to Call guard, and then press
SELECT.
3. Press or
the telephone base to scroll to Calls w/o num, and then press
SELECT.
4. Press or
on the telephone base to scroll to Call guard annc., and then
press SELECT.
5. Press or
the telephone base to scroll to Annoucement, and then press
SELECT.
SELECT
6. Press
7. The handset or telephone base announces "Record after the
tone. Press STOP when you are done." After the tone, speak
towards the microphone. Press
To play your outgoing message for calls without number:
MENU
1. Press
2. Press or
on the telephone base to scroll to Call guard, and then press
SELECT.
3. Press or
the telephone base to scroll to Calls w/o num, and then press
SELECT.
when the phone is not in use.
on the handset, or CALLS / or PHONEBOOK /
on the handset, or CALLS / or PHONEBOOK / on
on the handset, or CALLS / or PHONEBOOK /
on the handset, or CALLS / or PHONEBOOK / on
to select Record annc.
when the phone is not in use.
on the handset, or CALLS / or PHONEBOOK /
on the handset, or CALLS / or PHONEBOOK / on
STOP
when done.
68