Table of Contents
Advertisement
LED Configuration
To modify the behavior of the LEDs on the 460 gateway, navigate to Other->Setup LEDs.
Each LED may be set to Disabled, Protocol 1, or Protocol 2. If either protocol is a master/client, you may
set the LED to represent either all slaves/servers configured in the gateway or a slave/server device.
To select a slave/server device:
1) Select the protocol in the left dropdown menu.
2) Click Save Parameters to generate the second dropdown menu.
3) Select the individual slave/server in the right dropdown menu.
Click the Save Parameters button to commit the changes and reboot the gateway.
Real Time Automation, Inc.
86
1-800-249-1612
Advertisement
Table of Contents
