Mounting With A Din Rail; Installing; Removing - Real Time Automation 460BMSAWS-N2E Product User Manual

Mounting with a DIN Rail

Installing

Follow these steps to install your interface converter.
1) Mount your DIN Rail.
2) Hook the bottom mounting flange under the DIN Rail.
3) While pressing the 460BMSAWS-N2E against the rail, press up to engage the spring loaded lower clip
and rotate the unit parallel to the DIN Rail.
4) Release upward pressure.

Removing

Follow these steps to remove your interface converter.
1) Press up on unit to engage the spring loaded lower clip.
2) Swing top of the unit away from DIN Rail.
Real Time Automation, Inc. 14
DIN Rail
Spring Loaded Lower Clip
1-800-249-1612