Table of Contents
Advertisement
BACnet MS/TP Subordinate Configuration: Manual Configure Mode
1) To transition from Auto-Configure Mode to Manual Configure Mode, click the dropdown in the
middle of the BACnet MS/TP Subordinate Configuration page and select Manual Configure.
a. When prompted, click OK to confirm mode change or Cancel to remain in Auto-
Configure Mode.
b. Once OK is clicked, there are two options on how to proceed.
i.
To keep the current data groups and object properties (includes any default object
names, units, and COV) that are already configured, press OK.
-
ii.
To delete the current data groups and object properties (includes any default object
names, units, and COV) that are already there and start over, press Cancel.
2) For each object type in the read and write data groups sections, select the number of objects
that the Subordinate will support.
3) Each object has its starting object number sequentially identified at one. This field may be
modified.
4) When done, click the Save Parameters button.
Real Time Automation, Inc.
You would want this option if you are adding additional data groups or you
want to modify the data group(s) that already exist.
25
1-800-249-1612
Advertisement
Table of Contents
