Introduction - Kesla 2009S User Manual

DEAR CUSTOMER,
Thank you for choosing a KESLA product and we wish you success in your work. We ask you to
carefully read this manual as good knowledge of the machine's operation and meticulous man-
agement result in the best occupational safety conditions and the machine's productivity from day
to day. It is important that you have understood and complied with every section of this book. In
case of doubt please contact your dealer. You can also provide feedback to Kesla using the feed-
back form at the end of this manual or at www.kesla.fi.

1 INTRODUCTION

1. Read the instructions first. A prerequisite of the crane's use is a good understanding of its
safety and operating instructions.
2. Check the basic unit's compatibility with regard to hydraulics and standing stability.
3. Follow the installation instructions and, if necessary, ask more information from your dealer
or from the factory.
4. Carry out legally required inspections.
5. Practice makes perfect.
6. Always work with caution.
7. Make a slow full-scale operating movement back and forth with all the loader's cylinders to
make the gaskets more flexible.
8. Grease often and only a little bit rather than rarely and a lot.
9. Cleanliness is the most important thing in hydraulic systems.
10. Pre-loading oil: TEBOIL ECO 46
11. Repair even small defects before they can cause more serious damage.
GENERAL INFORMATION
1