Table of Contents
Advertisement
4.4
INSTALLER
4.4.1 Safety instructions
Please read and understand the operation, maintenance, and safety in-
structions before operating or servicing the cranes. Operation, mainte-
nance and adjustment may only be carried out by people qualified for
operating and servicing the specified device. Lack of information on the
device's operation and characteristics can cause serious injury or death.
4.5
INSPECTIONS
Inspectors:
The person that performs the commissioning inspection and periodic inspections must be a com-
munity of experts validated by an assessment body intended in § 4 of the regulation on the ac-
creditation of assessment services (920/2005) or by an independent expert approved by a certifica-
tion body validated by an assessment body
Protocol storage:
The crane is supplied together with protocol forms for the commissioning inspection and periodic
inspections. The forms must be completed for each inspection and must be stored in a visible and
accessible place at the crane or in its immediate vicinity during the crane's entire service life.
Safety instructions:
The same safety precautions are valid both for inspections and for normal operation
4.5.1 Commissioning inspection
Before first commissioning as well as before commissioning after any safety-critical repair and
modification works a commissioning inspection of the crane has to be carried out. It shall include
measures according to the commissioning inspection protocol (Appendix 1), including inspection of
parts and equipment relevant to safety, a test loading according to the standard SFS EN 12999 or
manufacturer's instructions and, if necessary, an inspection of the crane's standing stability (SFS
EN 12999). The crane's control system based on contactless (electro-magnetic) data transfer must
be checked even when it is installed to a crane that is already in use.
4.5.2 Warranty service
An authorized service centre performs operations according to the warranty service protocol (An-
nex 2). Continuity of full warranty requires that this maintenance is carried out within 30 days from
the crane's installation date.
35
COMMISSIONING
Advertisement
Table of Contents
