Introduction Of The Machine - Kesla proG 20 Manual

GRAPPLES – USER MANUAL 8

3. INTRODUCTION OF THE MACHINE

The KESLA grapples are designed to be installed on cranes
specially equipped for forestry use. Before mounting make sure
your grapple is suitable for the base machine size.
The grapple is used for the handling of felled, delimbed and cut-
to-length timber as the loading device of a timber loader.
Grapple is designed only for mounted hanging free.
The heads are intended to process trees, all other use is
prohibited.
Never use the grapple for handling stones, scrap, etc., and never
use it as a hammer.
Pushing the grapple hard against the ground may damage it.
When handling fragile goods, note that there is a risk that the
goods can be damaged.