MAINTENANCE
9 LUBRICATION
The provided lubrication intervals are valid when the crane operates with a normal load under nor-
mal operating conditions. Shorten the lubrication interval if the crane is heavily loaded or when the
working conditions are unfavorable, such as with sand, dust, mud, etc.
9.1
LUBRICATION TARGETS
•
•
Use molybdenum-rich grease in joint bearings and in the slide
bearings of the booms (~ 2%). in other locations general grease is
suitable.
Shorten the lubrication interval, where the working conditions are
particularly unfavorable, for example. dusty.
62