Displaying Density
Changing Density
5-8
GA34-0054
Follow these steps to display the printer's current density code:
Step 1
Press the Stop Reset key.
Step2
Press the Display key.
The printer's current density
code is displayed as long
as you hold the key. Code E
is displayed only if the
printer is online, not ready,
and the host has selected a
special density.
D
Stop Reset
Density
D
Display
Follow these steps to change the density:
Step 1
Press and hold the 2nd Mode key.
Step2
Press the Density key.
Each time you press the
Density key, the display changes
to a new code (A, B, C, D, or E).
Release the 2nd Mode key.
Note: When the printer is online and
not ready, and you select code E, the
code previously chosen by the host
system is set.
If
the host
system has not made a choice, code
A is set.
2nd Mode
D
Density
D
Display