Neomatica ADM500 Operation Manual
  1. Manuals
  2. Brands
  3. Neomatica Manuals
  4. GPS
  5. ADM500
  6. Operation manual

Neomatica ADM500 Operation Manual

Vehicle tracker
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADM500 and is the answer not in the manual?

Questions and answers

Related Manuals for Neomatica ADM500

Summary of Contents for Neomatica ADM500

  • Page 2: Table Of Contents

    6.5.2 Connection of iButton ......................29 6.6 Connection of devices via Bluetooth Low Energy ............30 6.6.1 Connection of BLE sensors ....................30 6.6.2 Adding BLE sensors in automatic mode ................30 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 3 14 Scope of supply ......................... 54 15 Acceptance certificate ..................... 54 Appendix A. Description of the bits of the field “STATUS” ............55 Appendix B. Description of transmitted parameters in Wialon ..........56 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 4 This Operation manual relates to the vehicle tracker ADM500 GLONASS/GPS - LTE/GSM (hereinafter referred to as tracker) and describes the procedure of its installation and connection as well as its function and settings. The Operation manual is designed for professionals who have familiarized themselves with the rules of repair and installation works execution in vehicles and who have special professional knowledge in electronic and electric equipment used on various transport means.

  • Page 5: Purpose And Function

    − travel direction changes by an angle which is greater than the pre-set one; − the straight-ahead travel is performed at a distance, which is longer than the pre-set one; Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 6 − data about events occurred; − device status; − data from the sensors connected via radio channel Bluetooth Low Energy; − data from the sensors connected to RS-485 and 1-Wire. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 7: Technical Specifications

    0…58,8 V; discreteness (sensitivity): 57,4 mV; input resistance: 200 кOhm. − Number of discrete outputs of “open collector”: 2. − Characteristics of discrete output of “open collector” type”: Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 8 − Power voltage: +9...+42 V of unregulated direct current. − Current consumption (at the supply voltage 12 V): maximum: 200 mА; average: 30 mА. − Dimensions: 128х61х22mm; − Weight: 113 g. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 9: Design

    − flashes once – the GLONASS/GPS/BDS/Galileo/QZSS/SBAS unit has determined the time and the valid coordinates. The blue LED indicates the status of the GLONASS/GPS/BDS/Galileo/QZSS/SBAS unit of the combined module: Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 10 − constantly shines, briefly turning off - SIM card is not available. The scheme of tracker connector pins is given in Fig. 2. Figure 2 –Scheme of pins location Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 11: Installation

    If there are valid satellite data and an established connection to the server, the tracker will catch the time, coordinates and transmit information packets to the server, which will be marked by a single flashing of the green and blue LEDs. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 12: Tracker Setting

    “Select device” flag. In such a case a random tracker from all the detected ones will be connected. Figure 5 – ADM Configurator waiting for device connection Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 13: Using Configuration Commands

    To send commands via Bluetooth you should use ADM Configurator. If earlier the tracker under configuration had a password different from 0, then ADM Configurator will ask for the password. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 14: Configuring Sim

    Configure the IP address and port of the server (host) using SETHOST0 or DN0 command. Change of these parameters is possible in the graphical interface of the program "ADM Configurator". Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 15: Setting Data Transmission

    OUTS Analogue inputs IN_A Discrete inputs IN_D Fuel level sensors FUEL Odometer 1-Wire Can-Log CANLOG Modbus MODBUS 1024 ADM20/21 ADM20 2048 ADM BLE sensors ADM3X 4096 BLE beacons BEACON 8192 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 16: Dynamic Black Box

    The quality is enough to monitor the movement path. The drawing of road turns is simplified. Slight route changes are not drawn (expected points per km are twice less than in preset Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 17: Expert Setting Of Tracking Parameters

    M=255 – apply same parameters for all the modes M=0 – slow movement M=1 – medium -speed movement M=2 – fast movement A – angle for speed mode with M number. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 18 Response format: TRACK X,Y,Z; (M) A1,B1; (M) A2,B2; (M) A3,B3 X – minimum speed Y - distance (meters) Z - acceleration (km/h per a second) M=0 – slow movement M=1 – medium speed movement Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 19: Alarm Mode Of Data Record

    In this way, when the ignition is off, an event will be formed at the input and the coordinates fixation will be initiated. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 20: Coordinates Fixation According To Vibration Level

    The tracker has got two modes of routes record: “Tracker” and “Beacon”. The working mode is set by DMODE command. Mode “Tracker” is set by default. DMODE X X=0 – “Тracker” mode. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 21 1. Minimum activity time - the time during which the tracker will be guaranteed to be in an active state, even if all necessary actions are performed. This time allows waiting for an incoming SMS containing a command; Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 22 The recommended minimum activity time is 120 seconds, the recommended maximum activity time is 180 - 300 seconds and more. Example of setting up a wake-up once an hour: BTIME 120,240,3600,3600. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 23: Connection Of Extra Devices

    The measured voltage levels are registered by the tracker and transmitted to the server. When changing the discrete state, an extraordinary packet is sent. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 24: Discrete (Impulse) Inputs

    Discrete output allows handling extra equipment. When switched on, the output is connected to the minus of the tracker external power supply. Connection should be done according to the scheme in Figure 9. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 25 When a more powerful load commutation is needed, it is necessary to use a relay. Figure 10 - Scheme of the connection of load with the current consumption exceeding 100mA Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 26 X - number of the output 0 or 1 Y=1 – switch on (to short output to ground), Y=0 – switch off (to put output in a state of breakage). Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 27: Rs-485

    The FUEL command allows you to check the addresses of the sensors, as well as view the list of added addresses. You do not need to enter a colon when entering an address. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 28 FUEL - indicate the specified list added to the terminal. Example of command input: FUEL 0,1 – add address 1 to cell 0;; FUEL 1 – add address 1 to the first free cell. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 29: 1-Wire

    To see the data from any sensor connected to 1-Wire bus use OWTEMP X command, where X- sensor sequence number (0…7). 6.5.2 Connection of iButton − connect the reader of iButton DS1990 to the 1-Wire bus; Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 30: Connection Of Devices Via Bluetooth Low Energy

    6.6.2 Adding BLE sensors in automatic mode The BLEAUTOCATCH command starts the search and automatic record of the found sensors addresses to the BLESENSOR and BLEFUEL lists. By default, the search is performed within two Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 31 Italon fuel level sensor − R – RSSI level Acceptable filter range from minus 1 to minus 127 dBm. Entering value without a character is acceptable from 1 to 127. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 32: Adding Sensors Adm31, Adm32, Adm35 In Manual Mode, Viewing Added Sensors List

    BLESENSOR – display the list of addresses added to the tracker. Example of commands input: BLESENSOR 0,FC61CFEF5E31 – add address FC:61:CF:EF:5E:31 to the cell 0; BLESENSOR FC61CFEF5E31 – add address FC:61:CF:EF:5E:31 to the end of the list. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 33: Data Receiving From Connected Adm31/32/35 Sensors

    LMT – time passed from the receipt of the last message from the sensor. S – sensor status. − ADM31/35: T - temperature. L - illumination. H - humidity. − ADM32: A - angle value in degrees. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 34: Setting The Acceptable Readings Range For Adm31/32/35 Sensors

    This command is for entering MAC addresses of BLE FLS and addresses of wired FLS, connected via the RS-485 bus. The sensor type is determined automatically according to the format of the entered address. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 35: Data Receiving From Connected Fuel Level Sensors

    F – software version; LMT – time passed since the last message from the sensor was received; R - RSSI. Decoding of the answer for DUT-E: DT - device type Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 36 DTC – failure mask. Fields of the mask are described in the sensor protocol LMT – time passed since the last message from the sensor was received R - RSSI. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 37: Data Transmission To The Server From Connected Sensors

    Use 2 formulas to calculate two ranges of incoming values: For the range values from 0 to 32767 – apply formula X*0.01 For the range values from 32768 to 65535 - apply formula X*0.01-655.36 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 38 25.5 value (after formula calculation) is considered as an error code “no signal from sensor”. • Hall sensor (magnetic field detector) Conversion is not needed. Acceptable values range is 0 – 1. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 39: Selecting Data To Be Transmitted To The Server From Adm31/32/35 Sensors

    Discreetness: integer value. Values range: 0...65534. Sensor data greater than 65534 are considered to be equal to this value. 65535 value is considered as an error code “no signal from sensor”.. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 40 1 – full value format. Discreetness: two decimal places Values range: 0.00 - 83865.60 42949672.95 value (after formula calculation) is considered as an error code “no signal from sensor”. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 41: Commands Description

    Y=0…3 – number of the Bluetooth and GPRS) Example: plan to manage the tracker via SMS. PHOES (0)= (1)= memory cell to store the Example: +7xxxxxxxxxx (2)= (3)= number ADD ME +7xxxxxxxxxx,1 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 42 Change the password from the old X to the Example: Example: X=0. new Y. PASS 0,86974543 Pass=86974543 The password is a number from one to Y – New password. eight digits Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 43 IMEI 359587013832624 seconds after the tracker is switched on or restarted. X – settable tracker ID SN X SN X Set the tracker ID. Example: Example: SN 123456789 SN 123456789 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 44 X=internet.beeline.ru; command without parameters returns the SETGPRS0 Example: current GPRS settings for the SIM card. Y - login, default Y=beeline; internet.mts.ru,mts,mts GPRS: – password, default APN=internet.mts.ru, Z=beeline. user=mts, pass=mts Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 45 X – number determining a PROTOCOL X PROTOCOL X Configure the set of data to be transmitted data set to be transmitted to the server. (detailed description see in clause 5.5 Setting data transmission). Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 46 X=30. A command without parameters returns current settings. Y – the recording period during parking in seconds, by default Y=300. The value of X must be less than Y. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 47 InFalse 0,0,4000 InFalse 0,0,4000 limit in mV. X=0 – input number (always InInfo X Example: Input 0: InTrue Request information about the input Example: 8000..15000, InFalse settings. InInfo 0 0..3000 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 48 OUTPUT X,Y OUTPUT X Control of tracker output. Command without parameters returns the current Y=1 – active output. Example: Example: output settings. Y=0 – inactive output. OUTPUT 0 OUTPUT 0 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 49 [0]:D8A05B9BEF5B; DT:1; BLESENSOR sensors list ) ADM31/32/35 PT:3; F:5; V:3.0; T:25.35; (detailed description in clause. 6.6.3.1 Data L:412.80; H:35; R:-51; receipt from bound sensors ADM31/32/35). LMT:6; S:0; Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 50 C,D – lower and upper limits for the “upper” sensor state. X – ime in seconds ALARMPERIOD X ALARMPERIOD X Set the period of information packets in an alarm mode. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 51 ADM31/32/35). X=0 – shortened LIGHTPROTOCOL X Select the transmission format of the illumination level (detailed description in X=1 – full clause 7.3 Selecting the transmission format of the illumination level). Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 52: Updating Tracker Software

    2) click “Update” in the pop-up window; 3) drag the firmware file to the appropriate field in the ADM Configurator window; 4) after updating the firmware, the tracker will reboot and become available for operation. Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 53: Updating The Tracker Software Via Gprs

    When there are signs of oxidation or other proofs of liquid penetration in the device housing; Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 54: Marking And Packaging

    Trackers ADM500 GLONASS/GPS-GSM/GPRS SHAIF.464512.001-10 in quantity of _____ pcs. correspond to SHAIF.464512.001 ТУ and are valid for use. Manufacture date: «Neomatica» LLC 24a Malkova Str., office 6, 614087, Perm, Russia Tel: +7 (342) 2-111-500. E-mail: sales@neomatica.com Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 55: Appendix A. Description Of The Bits Of The Field "Status

    External power supply of the tracker is switched off Sign of GNSS jamming GNSS jamming 1024 Alarm 2048 4096 Operation in LTE network 8192 Time is synchronized via the GSM 16384 A command has been received 32768 Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

  • Page 56: Appendix B. Description Of Transmitted Parameters In Wialon

    Temperature value in sensor №1 temp2 Temperature value in sensor №2 temp3 Value of device status Discrete state on input AIN0 Discrete state on input AIN1 Sign of tracker restart Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...
  • Page 57 CAN-LOG Data can43-can62 BLE tags (parallel transmission of several numbers) can59 ADM20: ADM21 tags can60 ADM20: RFID cards can62 BLE tags (transfer of all numbers in one field) can63 iButton Neomatica LLC. Vehicle tracker ADM500 GLONASS/GPS. Ver. 1.1 dtd 22.09.2023...

Table of Contents