1. Manuals
  2. Brands
  3. Neomatica Manuals
  4. GPS
  5. ADM333 BLE
  6. Operation manual

Neomatica ADM333 BLE Operation Manual

Vehicle tracker glonass/gps-gsm/gprs
Hide thumbs Also See for ADM333 BLE:
Table of Contents

Advertisement

Quick Links

Download this manual
Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADM333 BLE and is the answer not in the manual?

Questions and answers

Related Manuals for Neomatica ADM333 BLE

Summary of Contents for Neomatica ADM333 BLE

  • Page 1 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 2: Table Of Contents

    6.3.4.1 Data receiving from connected fuel level sensors ............28 7 Data transmission to the server from connected sensors ............ 29 7.1 Description of ADM31 sensors parameters transmitted to the server ......29 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 3 14 Scope of supply ........................45 15 Acceptance certificate ......................45 Appendix A. Description of the bits of the field «STATUS» ............. 46 Appendix B. Description of transmitted parameters in Wialon ..........47 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 4 This Operation manual relates to the vehicle tracker ADM333 BLE (hereinafter referred to as tracker) and describes the procedure of its installation and connection as well as its function and settings. The Operation manual is designed for professionals who have familiarized themselves with the rules of repair and installation works execution in vehicles and who have special professional knowledge in electronic and electric equipment used on various transport means.

  • Page 5: Purpose And Function

    The vehicle travel route is described in the form of separate points in time. The route point is saved when at least one event occurs, such as: ⎯ travel direction changes by an angle which is greater than the pre-set one; Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 6: Technical Specifications

    ⎯ data from the sensors connected via radio channel Bluetooth Low Energy 2 Technical specifications ⎯ GLONASS/GPS receiver: chipset: МТ3333 (MediaTek); frequency bands: GLONASS – L1 (СT-code), GPS - L1 (С/А code); Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 7: Design

    ⎯ weight: not more than 39 g 3 Design Functionally, the tracker consists of a microcontroller, non-volatile memory, a combined GLONASS/GPS-, GSM-, Bluetooth module, a battery, analog inputs and a discrete output. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 8 ⎯ flashes once - the tracker has established connection to the server and successfully transmits the information packets; ⎯ constantly shines, briefly turning off - SIM card is not available. The scheme of tracker connector pins is given in Fig. 2 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 9: Disassembling And Assembling Of The Housing

    It is strongly recommended to carry out a preliminary check of the tracker before installation, using a power supply different from the vehicle on-board power, with an output voltage from 8 V to 40 V DC and current of at least 1 A. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 10 If there are valid satellite data and an established connection to the server, the tracker will catch the time, coordinates and transmit information packets to the server, which will be marked by a single flashing of the green and blue LEDs. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 11: Tracker Setting

    “Select device” flag. In such a case a random tracker from all the detected ones will be connected. Рисунок 5 – ADM Configurator waiting for device connection Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 12: Using Configuration Commands

    If it is not possible to change parameters or parameters are not enough, the tracker will answer with an error message. A command without parameters returns the current settings. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 13: Configuring Sim

    The priority is set in the graphic interface of the ADM Configurator or using SIMPRIORITY command. By default, priority is not set. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 14: Setting Connection To The Server

    Table 1. Values of the main parameters for PROTOCOL command Data packet name Parameter value Main data NAVIGATION DATA Outputs, events in inputs OUTS Analogue inputs IN_A Fuel level sensors FUEL Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 15: Setting Route (Track) Drawing

    Slight direction changes and road turns are drawn with details. TRACKSET 3 Slight changes in direction are drawn with more details (expected points per km are 1.3 times more than in preset 2) Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 16: Expert Setting Of Tracking Parameters

    • Setting same parameters for all speed modes: TRACK 255,10,6 – Set 10 degrees for the threshold value of route change and 6 for deflection • Setting different parameters for all speed modes: Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 17: Alarm Mode Of Data Record

    The tracker switches to the alarming mode of data record when the sensors data are beyond the set range. Such a mode does not affect other conditions of routes record. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 18: Setting The Fixation (Freezing) Of Coordinates During The Parking

    In such a mode coordinates fixation is done automatically at the absence of vibration. Current level of vibration (a sum of acceleration on three axes) is determined by the acceleration meter. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 19: Operation Mode

    The routes record is done only using the following criteria: ⎯ at tracker start up; ⎯ change of discrete state at input; ⎯ regarding the parking period; ⎯ regarding alarming period; ⎯ change of device status Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 20: Connection Of Extra Devices

    The measured voltage levels are registered by the tracker and transmitted to the server. When changing the discrete state, an extraordinary packet is sent. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 21: Discrete Output

    It is allowed to connect devices with the maximum current consumption not exceeding 100mA, otherwise there is a risk to damage the tracker. When a more powerful load commutation is needed, it is necessary to use a relay. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 22 It is possible to control the output condition with the OUTPUT X command X=1 – switch on (to short output to ground), X=0 – switch off (to put output in a state of breakage). Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 23: Connection Of Devices Via Bluetooth Low Energy

    60 dBm. Such a filter mode allows adding sensors located at the distance of 0 to 0,5 meters from the tracker. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 24 Acceptable range of search duration from 10 seconds to 120 seconds. 6.3.2.2 Usage options of «BLEAUTOCATCH» command. • Search within 120 seconds, without the filter according to radio signal level minus 60 dBm. BLEAUTOCATCH Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 25: Adding Sensors Adm31, Adm 32 In Manual Mode, Viewing Added Sensors List

    BLESENSOR FC61CFEF5E31 – add address FC:61:CF:EF:5E:31 to the end of the list. 6.3.3.1 Data receiving from connected ADM31/32 sensors The BLESENSORINFO command allows to request the latest data received by the tracker from the sensor. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 26 6.3.3.2 Setting the acceptable readings range for ADM31/32 sensors When the readings are beyond the acceptable range the tracker will switch to the route points record at an alarm period. Setting the acceptable temperature range. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 27: Adding Ble Fuel Level Sensor In A Manual Mode, Viewing Added Sensors List

    BLEFUEL X,0 – clear cell X; where X=0..2; BLEFUEL Y - add address Y to the end of the list, BLEFUEL 0 – clear the list. BLEFUEL - display the list of addresses added to the tracker. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 28: Data Receiving From Connected Fuel Level Sensors

    LMT - time passed since the last message from the sensor was received R - RSSI Decoding of the answer for GNOM: DT - device type F - software version P - pressure characteristics in the pneumatic system T - temperature Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 29: Data Transmission To The Server From Connected Sensors

    To prevent values jumps when there is no communication with the sensors, it is recommended to set a range of permissible values on the software side. Or apply other filters supported by the software you use. • Temperature Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 30 25.5 value (after formula calculation) is considered as an error code «no signal from sensor». • Hall sensor (magnetic field detector) Conversion is not needed. Acceptable values range is 0 – 1. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 31: Selecting Data To Be Transmitted To The Server From Adm31/32 Sensors

    Sensor data greater than 65534 are considered to be equal to this value. 65535 value is considered as an error code «no signal from sensor». 1 – full value format Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 32 Discreetness: two decimal places Values range: 0.00 - 83865.60 42949672.95 value (after formula calculation) is considered as an error code «no signal from sensor». Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 33: Commands Description

    Y=0…3 – number of the Bluetooth and GPRS) Example: plan to manage the tracker via SMS. Example: PHOES (0)= (1)= memory cell to store the ADD ME +7xxxxxxxxxx,1 +7xxxxxxxxxx (2)= (3)= number Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 34 SatCnt=5 Stat=0x0000 Time - current time and date according to Greenwich Mean Time, Nav- validity coordinates, Lat - latitude, Lon - longitude, Speed-speed, SatCnt - number of satellites, Stat - status. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 35 Set the priority of SIM card X=1 – priority of SIM0. Example: Example: X=2 – priority of SIM1. SIMPRIORITY 0 SIMPRIORITY 0 ICCID ICCID Command without Request of ICCID of installed SIM cards parameters Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 36 Example: server, server to which the terminal connects to DN0 www.test.ru:1000 HOST0= www.test.ru:1000 Y - server port. transmit information. A command without parameters returns the current server address and port. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 37 X=30. A command without parameters returns Y – the recording period current settings. during parking in seconds, by default Y=300.The value of X must be less than Y. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 38 InInfo X Example: Input 0: InTrue settings. Example: 8000..15000, InFalse InInfo 0 0..3000 Command without Request current measured voltage level in INPUT INPUT0 = 12000 parameters the analog input (mV). Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 39 X=0 – disabled output. Example: OUTPUT 0 Example: OUTPUT 0 output settings. reset… Command without Restart of the unite RESET parameters start update… Command without Firmware renewal UPDATE parameters Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 40 A и B –range limits of acceptable temperature. X – sensor number from LIGHTRANGE X,A,B Set acceptable range for illumination BLESENSOR list sensor. A and B – range limits of acceptable illumination. Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 41 X – cell number of the BLEFUELINFO X Data request from bound fuel level sensors BLEFUEL sensors list (detailed description in clause 6.3.4.1 Data receiving from connected fuel level sensors Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 42 ADM31/32). X=0 – shortened Select the transmission format of the LIGHTPROTOCOL X illumination level (detailed description in X=1 - full clause 7.3 Selecting the transmission format of the illumination level Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 43: Updating Tracker Software

    2) click «Update» in the pop-up window; 3) drag the firmware file to the appropriate field in the ADM Configurator window; 4) after updating the firmware, the tracker will reboot and become available for operation Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 44: Updating The Tracker Software Via Gprs

    When there are signs of oxidation or other proofs of liquid penetration in the device housing; ⎯ a tracker without housing; ⎯ a tracker with signs of repair performed beyond the manufacturer's service center; Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 45: Marking And Packaging

    _____ pcs. correspond to SHAIF.464512.001 ТУ and are valid for use. Manufacture date: Manufacturer: «Neomatica» LLC 24a Malkova Str., office 6, 614087, Perm, Russia Tel: +7 (342) 2-111-500. E-mail: sale@neomatica.ru Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 46: Appendix A. Description Of The Bits Of The Field "Status

    Coordinates are fixed at the absence of movement External power supply of the tracker is switched off Sign of GNSS jamming GNSS jamming 1024 2048 4096 8192 Time is synchronized according to GSM 16384 32768 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

  • Page 47: Appendix B. Description Of Transmitted Parameters In Wialon

    Discrete state on input AIN1 Sign of tracker restart Number of active SIM card (0 – SIM0, 1 – SIM1) in10 in11 No connection with server in12 in13 Sign of low battery voltage Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...
  • Page 48 Fields are used to transmit data from BLE sensors. Fields description Can26 Battery voltage, BLE fuel level sensor 0 Can27 Battery voltage, BLE fuel level sensor 1 Can28 Battery voltage, BLE fuel level sensor 2 Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019...

Table of Contents