Advertisement
Quick Links
ASSEMBL Y
A9235 PRO SPEAK EVO
FOR HORUS X
1.
2.
3.
4.
Remove the cheekpads as indicated
in the helmet user manual.
Place the right speaker (R) in its seat
after applying the adhesive round shaped
Velcro included in the package.
Repeat the operations performed for the
right (R) speaker for positioning the left
(L).
Position the microphone by passing the
boom under the chinstrap that will be
housed in its seat.
Advertisement
Related Manuals for Caberg A9235 PRO SPEAK EVO
Summary of Contents for Caberg A9235 PRO SPEAK EVO
- Page 1 ASSEMBL Y A9235 PRO SPEAK EVO FOR HORUS X Remove the cheekpads as indicated in the helmet user manual. Place the right speaker (R) in its seat after applying the adhesive round shaped Velcro included in the package. Repeat the operations performed for the right (R) speaker for positioning the left (L).
- Page 2 ASSEMBL Y A9235 PRO SPEAK EVO FOR HORUS X Adjust the microphone’s position by deforming its boom. WARNING check that the triangle on the microphone is facing th mouth. Remove the inner liner. Place the cables in the gap between the inner and outer shell.
- Page 3 ASSEMBL Y A9235 PRO SPEAK EVO FOR HORUS X Pass the flat cable of the remote control between the neckroll’s pp plate and the shell. The remote control must remain accessible outside the helmet. Fit the keypad on the left side (helmet...