Getting Connected; Connecting To A Mixer; Connecting To An All-In-One System - VocoPro UHF-6800 Owner's Manual

Getting connected

The UHF-6800 gives you two options for outputting vocals
1. Each channel independently using the BALANCED A and B XLR outputs
2. Each channel together using the MIXED ¼" output
There are a number of ways to integrate the UHF-6800 into your audio system:

Connecting to a Mixer

Connect each mic channel to separate channels on the mixer using the BALANCED XLR outputs (Fig. A) or output both
channels to a single input using the MIXED ¼" output (Fig. B).
Mixer
Fig. A

Connecting to an All-In-One System

Using a ¼" cable, connect the MIXED output to a ¼" mic input on your all-in-one system.
All-In-One System
UHF-6800
PKJ-9090
UHF-6800
GIG-MASTER
10
Fig. B