Connecting An Mp3 Player; Powering /Charging An Mp3 Player - VocoPro SONIC STATION Owner's Manual

Connecting an Mp3 player

An Mp3 player or other audio device with an 1/8" output jack can be connected to the Sonic Station and played
through the speakers.
Connecting an Mp3 Player
1. Pull out the 1/8" cord located in the Mp3 Player slot and connect
it to the Mp3 player's 1/8" output jack
2. Set the sonic station to the AV 1 channel using either the AV1
button on the remote control or the SELECT button on the front
panel. The Sonic Station's display screen will indicate which
channel is currently set
3. Make sure the Mp3 player's volume is turned up completely and
the Music volume on the Sonic Station is turned up enough
Powering / Charging an Mp3 Player
An Mp3 Player can be powered and charged using the OUTLET UNSWITCHED jack on the rear panel of the Sonic
Station.
What you will need
• An Mp3 Player
• A charger for the Mp3 player
1. Connect the charger to the OUTLET UNSWITCHED jack on the rear panel of the Sonic Station
2. Run the other end through the opening on the back of the Mp3 player slot
3. Connect it to the Mp3 player
[Fig. J]
[Fig. K]
�� ��
�� ������� �� ����
�� ���� ������
������� ��������
�� ������� �� ����
������ ����������
11
����� ������
��� ������
����� ������ ���� ���
����� ���� ���
����
������ �������� ���� ���� ������ ���� ���������� �����
������
������ ������ ����� ���� �����
Fig. J
Fig. K