Table of Contents
Related Manuals for VocoPro KJM-7900 PRO
Summary of Contents for VocoPro KJM-7900 PRO
- Page 1 OWNER’S MANUAL KJM-7900 PRO PROFESSIONAL SERIES DIGITAL KARAOKE MIXER IMPORTANT INFORMATION: Thank you for purchasing the KJM-7900 PRO . To make full and effective use of this unit, please read this Owner ’s Manual carefully before operating.
- Page 2 GENERAL WARNING RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Congratulations! And thank you for purchasing the Vocopro JKM-7900 PRO. This unit has been designed with the professional KJ and DJ in mind to assist in providing the highest quality Karaoke entertainment available. With proper care and handling, this unit will continue to operate optimally for years. Please read this manual carefully before getting started. -
Page 4: Before You Start
Monoitor Out “L” and “R” You can connect the “MONITOR OUT, “L and “R” section of the KJM-7900 Pro to a powered monitor, to achieve a seperate monitor mix for your vocals, by connecting them to the “L” and “R” input connectors of your external “monitor” amplifier. The “MONITOR OUT”... -
Page 5: Rear Panel Hook-Up (Cont.)
MONITOR OUT RECORD OUT STEREO RETURN “Source Section’s 1 and 2” (PHONO/LINE) Source sections 1 and 2 are designed to connect turntables or additional players. If you are connecting a turntable be sure to connect it to the “PHONO L and R” jacks.These jacks have a lower signal output and are designed speciffically to connect turntables. Be sure to set the toggle switch on the board to “phono”... -
Page 6: Parts And Functions (Microphone Input Module)
PARTS AND FUNCTIONS (MIC INPUT MODULE) 1. Gain: This controls the input level for the “LINE” and “XLR” microphone inputs for the channel. It can be adjusted from 20dB to 60 dB. High EQ: This controls the level for a preset high frequency range. Use this control to boost ro reduce the high end frequencies in the microphone signal. -
Page 7: Parts And Functions (Music Module)
PARTS AND FUNCTIONS 1. Source Selector: Channels 1 and 2 allow the user to connect two players without video output. The source selector switch makes it possible to switch easily between players by “toggleing” it to the desired position. 2. Source Selector: Channel 3 allows the user to connect up to three players with video output. -
Page 8: Parts And Functions (Master Control Module)
PARTS AND FUNCTIONS (MASTER CONTROL MODULE) and expandability module... 1. DC 12V Lamp Connector 2. Power On/Off LED Level Meter: Displays sound or cue levels from the music sources. Digital Key Control & Multiplex: The digital key control feature works in the Master 2 mode. Press the Master 2/Key Control button on the desired channel (to the down position) then adjust the key control up or down to raise or lower the “key”... -
Page 9: Expandability Module
EXPANDABILITY MODULE The KJM-7900 Pro Expandability Module (KJ-Module) can be purchased separately through your authorized VocoPro dealer. One KJ-Module can be used to add three additional mic channels OR three additional music channels to your KJM-7900 mixer.. AND SPECIFICATIONS KJM-7900 SPECIFICATIONS...