Table of Contents
Advertisement
CHAPTER 5 CONTROLLING THE HARDWARE
The RAS feature can have the following controls over this equipment.
(1) Automatic shutdown of the equipment
When a hardware error occurs or a remote shutdown request through the contact input is
detected, the equipment can be automatically shut down. For details, see "5.1 Automatic
Shutdown of the Equipment".
(2) Controlling the hardware by using the RAS library
A user application can control the hardware of this equipment by using the RAS library. For
details, see "5.2 Controlling the Hardware by Using the RAS Library".
(3) Controlling the RAID status using the RAID configuration control command
The RAID configuration control command displays the status of the RAID and its drives. The
command can forcibly disconnect a drive and change the setting for RAID. For details, see
"5.3 RAID Configuration Control Command (raidctrl) [B/T Model only]".
5. CONTROLLING THE HARDWARE
5-1
Advertisement
Table of Contents
